Danner Work Boot Technology
MADE IN THE USA BERRY COMPLIANT
Danner's Berry Compliant boots have earned a certification that meets or exceeds the most stringent guidelines set by the Federal Trade Commission. Every component of this product, down to the raw material sourced to manufacture each part, is sourced from the United States. This boot is crafted from top to bottom in Danner's Portland, Oregon factory.
MADE IN THE USA
Danners Made in the USA footwear are a classification of manufacturing. It is Danner's promise that this product was built from top to bottom in Danner's Portland, Oregon factory. Their USA Made boots are built with the same commitment to superior craftsmanship that they have been known for since 1932.
MADE IN THE USA WITH IMPORTED COMPONENTS
Danner sources only the best materials from around the world and utilizes some construction work overseas, before shipping partially assembled components to be finished in their Portland, Oregon factory. Once in the factory, the boot uppers are formed and the entire bottom of the boot is constructed by hand, giving Danner boot crafters greater control over their finished product. This manufacturing process allows Danner to bring you a less expensive USA-made boot, without compromising the quality you expect from Danner.
STEEL TOE
All Danner footwear that have Steel Toe Caps meets or exceeds ASTM F2413-18 I/75 C/75 EH for safety in the workplace from heavy objcts that might drop or roll over the feet.
COMPOSITE TOE (NMT)
Danner's Composite Toe NMT (Non-Metallic Toe) boots do not transmit heat or cold, nor will they set off metal detectors. These boots meets, or exceeds, ASTM F2413-18 M I/75 C/75 EH standards.
THINSULATE ULTRA INSUALTION
Danner boots that are insulated incorporate Thinsulate Ultra Insulation, which is a High-performance insulation that keeps feet warm in the snow and rain without weighing you down.
GORE-TEX (GTX)
GORE-TEX (GTX) is a waterproofing system to make boots 100% waterproof, while still being breathable. GORE-TEX liners ensure that no water gets in, while allowing sweat and moisture to get out.
ELECTRICAL HAZARD (EH) PROTECTION
Danner footwear that has Electrical Hazard (EH) Protection are manufactured with non-conductive electrical shock resistant soles and heels. EH rated footwear is only a secondary source of protection.
REMOVABLE ORTHOLITE FOOTBED
Danner's Removable OrthoLite Footbed offers three layers of varying density, that are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
ELECTRICAL HAZARD (EH) PROTECTION
Danner footwear that has Electrical Hazard (EH) Protection are manufactured with non-conductive electrical shock resistant soles and heels. EH rated footwear is only a secondary source of protection.
WEDGE OUTSOLE
Danner's Wedge Outsoles are non-marking, oil-and-slip resistant outsoles that provide cushioning, lightweight support, traction, and that will not track debris indoors. The soft polyurethane compound is designed for maximum comfort for long days on smooth indoor surfaces, such as concrete and wood. Not recommended for daily use on asphalt.
RECRAFTABLE BOOTS
Danner footwear that is recraftable allows you to extend the life of the boot with their official recrafting services. Boots may be eligible for a number of paid services, including part replacement, leather care and restitching. See Danner's recrafting information here.